Set up Echo
Only the organization’s Owner can do this. Echo is off for an organization until the Owner turns it on.
Open Settings → Echo
Section titled “Open Settings → Echo”Open Settings and choose the Echo tab, or choose the settings icon in the Echo tray. The page header shows Echo’s status: Not set up, On or Off.
Other users who open the page see “Owner access required”.
Two steps
Section titled “Two steps”“Save a policy, then add a Gemini key.”
1. Save a policy
Section titled “1. Save a policy”- Turn on Enable Echo.
- Choose an Effort: Essential, Balanced or Deep.
- Check the limits. The defaults are fine to start; see Settings and limits.
- Choose Save changes. You see “Echo policy saved.”
2. Add a Gemini key
Section titled “2. Add a Gemini key”Echo uses the organization’s own Gemini key.
- Under Provider, choose Add key.
- Choose Gemini. Claude and ChatGPT are shown as “Coming soon”.
- Paste the key and choose Save key.
The key is “Stored encrypted. Only the masked ending is shown.”
If Echo is on but has no active key, the page says “On, but no key.” (or “The provider key is disabled.”) with an Add key or Replace key button.
Replace or disable the key
Section titled “Replace or disable the key”- Replace key: save a new key in place of the current one.
- Disable: confirm “Disable this key? Echo will not be able to make model requests with it.” Echo then cannot make model requests until you add an active key.
Turn Echo off
Section titled “Turn Echo off”Turn off Enable Echo and choose Save changes.